BST-819 PCBA Electronic Nano Waterproof and Anti-Corrosion Coating
BST-819 PCBA Electronic Nano Waterproof and Anti-Corrosion Coating

BST-819 PCBA Electronic Nano Waterproof and Anti-Corrosion Coating

Introduction
BST-819 is a room-temperature-curing liquid polysilazane polymer composed of polysilazane polymer, soluble nano-silicon, leveling agent, and fast-drying agent. It features slight odor, chemical resistance, low water vapor permeability, high hardness, and high insulation. It is mainly used for waterproof and moisture-proof treatment of PCB boards, electronic components, and metal surfaces. The surface sealed by it has strong hydrophobicity; in humid environments with large temperature differences, water cannot erode (penetrate) the coating. The protective film formed has very high insulation impedance, with an impedance value greater than 1×10¹² Ω. BST-819 can be either oven-dried or air-dried at room temperature, making operation very convenient.
Package
1L, 5L, 25L
Product Introduction
Product Characteristics

  • Liquid form, suitable for various types of electronic PCBA surface coating treatments;
  • Green and environmentally friendly solvent, capable of rapidly curing at room temperature to form a polymer;
  • Good resistance to various chemicals;
  • Good high- and low-temperature resistance;
  • Low refractive index, high light transmittance, does not affect the brightness of indicator lights on the circuit board;
  • Low water vapor permeability, waterproof rating up to IPX6 and IPX7;
  • Hardness 5–7H; the film layer can be dissolved by a 260°C soldering iron, allowing direct solder repair; Coating thickness of only 5–8 μm; the same volume covers a larger area, saving cost.

Specifications

Item
Value
Appearance
Colorless or light yellow, transparent
Viscosity
12 mPa·s
Density
0.93 (±0.02) g/cm³
Solid content
30%
Salt spray resistance
≥500 hours without corrosion
Temperature resistance range
-40℃~200℃
Film hardness
5–7H
Volume resistivity
≥1×10¹³ Ω (tested after fully dry)
Surface resistivity
≥1×10¹⁵ Ω (tested after fully dry)
Dielectric constant
≥3.1/kHz
Water contact angle
≥110°
Tensile strength at break
100 kg/cm²
Water vapor transmission
2 g/m²·24h
Coefficient of linear expansion
237 ppm/°C
Glass transition temperature (°C)
44 (TMA)
Salt spray resistance
>96 h
Service temperature range
-40°C to 260°C


Applications

This product can be widely used in home appliances, industrial electrical equipment, LED lighting, electronic power supplies, military and aviation fields, etc.

Check out current offers for the 313 GC

View More Offers

About us

Customer services

Sell on waimao.163.com

About waimao.163.com

About 163.com

Help Center

Supplier memberships

Feedback

Partner Program

Copyright ©️ 2022, NetEase Zhuyou(and its affiliates as applicable). All Rights Reserved.