BST-2400 PCBA Electronic Nano Waterproof and Anti-Corrosion Coating
BST-2400 PCBA Electronic Nano Waterproof and Anti-Corrosion Coating

BST-2400 PCBA Electronic Nano Waterproof and Anti-Corrosion Coating

Introduction
BST-2400 PCBA Electronic Nano Waterproof and Anti-Corrosion Coating is an ultra-low viscosity, low surface energy coating solution based on a modified one-component polymer as the primary film-forming substance. It is specifically designed for moisture and corrosion protection of printed circuit boards and electronic components. After drying, it forms an ultra-thin, transparent coating with excellent superhydrophobic properties, achieving a lotus effect in which water droplets roll off instantly. This effectively prevents moisture penetration and stain adhesion, eliminating leakage issues at the source. It dries quickly and efficiently, requires no complex curing process, is easy to apply, and greatly improves application efficiency. BST-2400 coating is non-flammable, ozone non-depleting, low toxicity, low Global Warming Potential (GWP), complies with RoHS and REACH regulations, and has low volatile organic compound (VOC) content.
Package
1L, 25L, 50L
Product Introduction
Product Characteristics

· Specifically designed for moisture and corrosion protection of printed circuit boards and electronic components

· Low surface energy enables lubricants, silicones, photoresist solutions, etc. to bead up and flow freely on coated surfaces

· Provides repellency and wetting resistance to liquids such as water, hydrocarbons, silicones, and photoresists

· In addition to liquids, also helps resist corrosive gases and vapors

· Essentially insoluble in solvents such as heptane, toluene, and water

· Adheres to a wide range of materials (metals, glass, ceramics, polymers, composites, laminates)

· Good thermal and electrical stability with excellent dielectric properties

· Easy to apply — dries quickly, no post-application curing required

· Excellent surface wetting, especially under low-standing SMT components

· Allows solder-through repair

· Non-flammable, ozone non-depleting, low toxicity

· Low GWP, RoHS and REACH compliant



Specifications

Item
Property
Appearance
Clear liquid solution
Density
1.75 g/mL
Viscosity
4–6 cP
Solvent Boiling Point
117°C
Flash Point
None (closed cup)
Environmental Attributes
 Low toxicity, low GWP, ozone non-depleting, non-flammable, RoHS compliant, REACH compliant, contains no chlorine or bromine

Item
Property
Coating Thickness
1.0–3.0 microns (depending on application method)
Solvent and Chemical Resistance
Level 1 (Test substrate: galvanized steel sheet coated with paint)
Contact Angle (static, dip coated/dried on glass substrate)
Contact Angle (static, dip coated/dried on glass substrate)
Solder-Through Repairability
Yes
Non-Flammability
UL94 V-0 rated
Thermal Conductivity
3.3 W/m·K
Dielectric Constant @ 30% RH
3.0 (@ 1 kHz)

Applications

  • Specifically designed moisture and corrosion protection for printed circuit boards and electronic components
  • A simple, economical conformal coating alternative
  • Anti-wetting, anti-sticking, anti-migration, and anti-corrosion properties in a wide variety of applications


Check out current offers for the 313 GC

View More Offers

About us

Customer services

Sell on waimao.163.com

About waimao.163.com

About 163.com

Help Center

Supplier memberships

Feedback

Partner Program

Copyright ©️ 2022, NetEase Zhuyou(and its affiliates as applicable). All Rights Reserved.